Home > Specialty Brass >

.50 Action Express (AE) Pistol Brass

50 A&E Pistol Brass

Alternative Views:

.50 Action Express (AE) Pistol Brass

  • Headstamps Are Mixed
  • Unprocessed
  • Washed and Polished
  • Brass and Nickel Casings
  • 100 Casings
Our Price: $60.00

Quantity in Stock:18
Availability:: Usually Ships in 2 to 3 Business Days
Product Code: SP50AE-Q0100

Touted as being one of the most powerful pistol rounds in production today, the .50 A&E, standing for .50 Action Express, is an American round made in 1988 by Evan Whildin of Action Arms. It was the third caliber created for the Desert Eagle Pistol, following the .357 Magnum and the .44 magnum. Essentially, the .50 A&E has the same rim diameter of the .44 magnum, allowing a Desert Eagle chambered in either caliber to be retrofitted with a simple barrel and mag change.

Due to laws about non-sporting firearms, the introduction of the .50 A&E in to the US was met with some resistance. Simply put, the law states that the bore of a non-sporting firearm may not be over 0.500” in diameter when measured from land to land. The original .50 A&E Desert Eagle’s bore diameter was right at .500” with convention rifling, causing the gauge plug used to test for acceptance to not go into the gun. However, after the rifling was switched to a polygonal rifling, the gauge plug dropped with ease. This allowed the gun to pass the law’s requirements. Many people shoot the .50A&E simply for the enjoyment, though it can be used to bring down big game should the situation call for it. New shooters should steer clear from it, however, as the recoil is hard, even with the weight of the gun taken into consideration. With recoil aside, the .50 A&E is exciting to shoot and doesn’t show any signs of going away.

Each box contains 100 once fired brass and nickel shell casings. Headstamps are mixed. This is unprocessed brass sourced from commercial shooting ranges. The casings have been washed and polished, but not resized and may still contain the spent primer. It is recommended that all brass be inspected prior to being reloaded and fired

Share your knowledge of this product. Be the first to write a review »