Home > Specialty Brass >

7mm-08 Rem Rifle Brass
7mm 08 Rifle Brass


 

7MM-08 Rem Rifle Brass

  • Headstamps Are Mixed
  • Unprocessed
  • Washed and Polished
  • 100% Brass Casings
  • 50 Casings
Our Price: $21.00

Quantity in Stock:1

Availability:: Usually Ships in 1 to 2 Business Days
Product Code: SP7MM08MHS-Q0050
Qty:

Description
 
First experimented with by Wildcatter’s, the 7mm08 is based simply on the .308 Winchester case necked down to 7mm. The original wildcat was utilized by both hunters and target shooters, gaining greater attention in the target shooting arena. Based on popularity, Remington officially adopted the cartridge in 1980 without any changes to the wildcat name or design.

After its formal introduction sales of 7mm08 rifles were modest but in no way an immense success. It was not until the mid to late 1990’s, the beginning of the ultra lightweight rifle trend, that the 7mm08 became a focal point for both hunters and retailers. Since 2000, the 7mm08 has absolutely soared in popularity. The cartridge is often promoted by retailers as having light recoil yet high down range energies while being available in light weight rifle platforms. The 7mm08 is also enjoyed by a newer type of western hunter, generally speaking, by those who have great work commitments and little time to hand load or practice hunting and shooting with higher recoiling rifles. The cartridge is supported by an abundant range of full pressure yet mild powered factory ammunition, ideally suited to medium game hunting. In competition circles the 7mm08 has lost a great deal of ground to the 6.5’s. Although the 6.5 bore has the potential to produce excellent exterior ballistics combined with minimal recoil, bore selection for match shooting has been and always will be equally affected by fashion trends and subjective experience.

Each box contains 50 once fired brass shell casings. Headstamps are mixed. This is unprocessed brass sourced from commercial shooting ranges. The casings have been washed and polished, but not resized and may still contain the spent primer. It is recommended that all brass be inspected prior to being reloaded and fired.





Share your knowledge of this product. Be the first to write a review »